Premium Whole House Water Filter System - High Capacity, Transparent, with Pressure Relief

PURE WATER IN EVERY DROP! - The Brand Visit the Store for More Info Next Page

Product Description: The 10"x 4.5" Transparent High Capacity Housing for Whole House Water Filtration System with 1" Inlet / Outlet Ports (RA-124-10S) is suitable for reducing sediment, dirt, rust, and suspended particles in incoming water to your house. The transparent housing body is made of reinforced polypropylene for strength and resistance to chemicals, and the black cap is made of high-flow polypropylene for toughness. The black cap has 1" inlet / outlet brass ports which allow better sealed connections to the corresponding pipes.

There is a rubber O-ring on the top of the housing body to ensure a watertight seal. A pressure relief button on the inlet side of the cap releases pressure in the housing for changing filter cartridges. These housings can be used in various high-flow applications and are usually placed in the main water line entering the house, including residential drinking water filtration, food service, and irrigation.

WARNING: OPERATING PRESSURE NO MORE THAN 60 PSI

Filter Cartridges Included in this Set: The 10"x 4.5" Pleated Washable & Reusable Sediment Filters (4 pack) reduce sand, dirt, silt, rust, and scale particles in residential and commercial water. Pleated filters are made of resin-impregnated cellulose and polyester media pleated around a polypropylene core for strength. These materials trap suspended particles, block microbes, and adsorb unwanted chemicals or substances that cause a chemical change to the water, such as acid neutralization.

The pleated design provides an amplified surface area that may extend the filter's life while removing undesirable particles and chemicals from the water by means of a semipermeable barrier, adsorption, and biological processes. Pleated filters are washable and reusable. The Ronaqua pleated sediment water filters have a flow rate of five gallons per minute (GPM).

The Big 10"x 4.5" water filter has wider dimensions than standard water filters, allowing it to process more water in less time for your house. The sediment filter removes physical debris and impurities from your water, with tiny holes that allow water to pass through while trapping unwanted particles.

Specifications: - Filter Type: Resin-impregnated Cellulose and Polyester Media 5 MICRON - Unit Height: 13.75 IN/34.93 CM - Unit Length: 7 IN/17.78 CM - Unit Width: 7 IN/17.78 CM - Inlet/Outlet Ports: 1" NPT - Flow Rate: 20 GPM - Operating Temperature: 40°F (4.4°C) - 125°F (51.7°C) - Operating Pressure: 20 PSI (1.4 bar) - 60 PSI (4.5 bar) - Cartridge Lifetime: Replace two or three times a year, depending on water quality - Cartridge Packaging: Wrapped and sealed, meets NSF (National Science Foundation) standards

Key Features: - Durable structure with reinforced polypropylene housing and high-flow polypropylene cap - Suitable for various high-flow and heavy sediment applications - Easy to operate with pressure relief button and transparent housing - Pleated washable sediment cartridge that meets NSF standards - Compatible with various well-matched housing models

product information: