Sediment Water Filter Cartridge 2-Pack Replacement for P5, AP110, WFPFC5002, CFS110, RS14, WHKF-GD05

PURE WATER IN EVERY DROP! is a brand that offers a range of high-quality water filtration products. One of their key offerings is the Melt-blown Four Layers Filtration Polypropylene Sediment Filter (2 pack).

A Sediment Water Filter removes physical debris and impurities from your water. The filter has tiny holes that allow water to pass through while trapping unwanted particles. The filter sizes are measured in microns, with smaller micron ratings capturing smaller particles. For water with larger particles, a sediment filter with a larger micron rating (such as 20 or 50 microns) is recommended as the first stage to prevent clogging of subsequent filters.

This sediment filter is often the initial filter installed in a Reverse Osmosis system, acting as a net to catch sand, dirt, silt, rust, and other fine particles. Sediment filters are made of fine melted polypropylene, which is then blown and spun into a cylinder-like form. Polypropylene is resistant to chemical solvents, bases, and acids. Removing these particles allows downstream filters, such as Carbon Block or GAC (Granular Activated Carbon) filters, to perform better and last longer.

These particles and pollutants originate from water sources, old and dirty pipes, as well as contaminants used to treat the water. The Sediment Water Filters feature a multi-layer gradient filtration design, with an Outer Zone, Mid Zone, Inner Zone, and Innermost Zone, to intercept a wide range of impurities, including rust, corrosion, coarse sand, fine sand, and other sediments.

These universal sediment filters are 2.5 x 10-inch in size and fit most standard under-sink Reverse Osmosis water filtration units or any type of water filtration units with standard 10-inch housing. They can also be used as pre-filters in Whole House Water Systems, Under Counter-top Water Filter Systems, and Counter-top Water Filter Systems to optimize the performance and lifespan of the carbon or GAC filters.

These sediment filters offer an extraordinary dirt-holding capacity and superior contaminant removal and flow rate compared to similar-sized sediment water filter cartridges. They can reduce sediment particles as small as 1 micron without adding taste, odor, or color to the water. These filter cartridges are ideal for residential, rural, commercial, industrial, and municipal applications.

The specifications of these sediment filters include: - Filter Type: Fine Melted Polypropylene - Height: 10 IN/24.4 CM - Outer Diameter: 2.5 IN/6.35 CM - Inner Diameter: 1.125 IN/2.5 CM - Micron Rating: 1 MICRON - Flow Rate: 5 GPM - Operating Temperature: 40°F (4.4°C) - 125°F (51.7°C) - Operating Pressure: 20 PSI (1.4 bar) - 125 PSI (8.6 bar) - Product Lifetime: Replace two or three times a year, depending on water quality

These filters are wrapped, sealed, and meet NSF (National Science Foundation) standards and regulations.

product information: