5 Micron 10 x 2.5 Sediment Water Filter Replacement Cartridge for Whole House RO System

The Membrane Solutions Polypropylene Melt-Blown Water Filter, with a part number of MPP-F10-5, is a 5-micron filter designed to provide your family with a safer and healthier life. Tested against NSF standards and ISO9001 certified, this BPA-free filter is made of 100% pure polypropylene material, ensuring no fiber shedding and preventing the re-contamination of drinking water.

As the first-stage filter in a filtration system, this sediment water filter removes up to 99% of rust, silt, sand, and other undissolved particles from dirty water. By protecting your post-filters, water appliances, and pipes, it delivers higher-quality water and a healthier lifestyle.

The 10-inch water filter cartridge typically filtrates up to 10,000-15,000 gallons of water, with the exact filtration capacity and change-out cycle depending on the inlet water quality and daily usage. To ensure optimal water quality, it is recommended to replace the filter regularly.

Featuring a multi-layer structure with three separate gradient density layers, the 5-micron filter is designed to deeply filtrate sediments and enhance its performance, resulting in a longer service lifetime compared to similar-sized sediment water filters.

This universal water filter is compatible with a wide range of Reverse Osmosis Systems, Under Sink Filtration Systems, and Whole House Water Filtration Units with 10-inch filter housings. It fits standard 10" x 2.5" filter models, including Culligan P5, Aqua-Pure AP110, AP110-NP, DuPont WFPFC5002, CFS110, OMNIFilter RS14, Whirlpool WHKF-GD05, American Plumber WC34-PR, and GE FXUSC.

Measuring 10 inches in height and 2.5 inches in width, with an inner diameter of 1.1 inches, the filter has a micron rating of 5 and an initial pressure drop of less than 0.3 psi at a flow rate of 5 gpm. It is designed to operate at a recommended service temperature of 40-113°F (5-45°C) and a maximum operating temperature of 180°F (82°C), with a maximum operating pressure of 75 psi at 68°F.

In summary, the Membrane Solutions Polypropylene Melt-Blown Water Filter is a high-performance, NSF-certified, and BPA-free filtration solution that protects your water system and ensures a safer, healthier life for your family.

product information: