Ronaqua 10x 2.5 Grooved Sediment Water Filter Cartridge

Here's the reworked version of the content, adjusting the language structure while maintaining the original meaning:

PURE WATER IN EVERY DROP! is the brand behind this offering.

For more information, please visit our store.

Product Description

This Melt-blown Four Layers Filtration Polypropylene Grooved Sediment Filter (6 pack) effectively removes physical debris and impurities from your water.

The sediment filter has tiny holes through which water can pass, while unwanted particles are retained. As these particles come in different sizes, the filters are available in various micron ratings - the smaller the micron measurement, the smaller the holes in the filter, allowing it to capture the smallest of particles.

Generally, for water that is more visibly polluted and contains larger particles, a sediment filter of a larger size (such as 20 or 50 microns) is recommended in the first stage of installation. This prevents clogging of the subsequent filter stages.

This sediment filter is often the first filter installed in a Reverse Osmosis circuit, acting as a net to catch unwanted particles, including sand, dirt, silt, rust, and other fine particles. Sediment filters are made of fine melted polypropylene, which is then blown and spun into a cylinder-like form. Polypropylene is resistant to chemical solvents, bases, and acids.

The removal of these particles allows filters, such as Carbon Block or GAC (Granular Activated Carbon) filters, to perform better and for longer periods of time. These particles and pollutants come from water sources, old and dirty pipes, as well as contaminants used to treat the water.

The main difference between a Grooved Sediment Filter and a regular Sediment Filter is the surface area; the Grooved Sediment has a larger surface area, which contributes to a longer life span of the filter and thus better filtration.

These Sediment Water Filters Intercept all Following Impurities: - Rust & Corrosion - Coarse Sand - Hard Scale - Fine Sand - Particles - Sediment - Dirt - Silt

These universal sediment filters are 2.5 x 10-inch and fit most standard under-sink Reverse Osmosis water filtration units or any type of water filtration units with standard 10-inch housing.

Sediment water filter cartridges are usually used as the first stage in Reverse Osmosis Systems, Whole House Water Systems, Under Counter-top Water Filter Systems, and Counter-top Water Filter Systems to optimize the performance and life span of the carbon or GAC filters.

These cartridges offer extraordinary dirt-holding capacity, superior contaminant removal, and superior flow rate compared to similar size sediment water filter cartridges. They will reduce sediment particles as small as 1 micron without adding taste, odor, or color to your water, making them ideal for all residential, rural, commercial, industrial, and municipal applications.

Specifications: - Filter Type: Fine Melted Polypropylene - Height: 10 IN/24.4 CM - Outer Diameter: 2.5 IN/6.35 CM - Inner Diameter: 1.125 IN/2.5 CM - Micron Rating: 1 MICRON - Flow Rate: 5 GPM - Operating Temperature: 40°F (4.4°C) - 125°F (51.7°C) - Operating Pressure: 20 PSI (1.4 bar) - 125 PSI (8.6 bar) - Product Lifetime: Replace two or three times a year, depending on water quality - Packaging: This filter is wrapped and sealed and meets NSF (National Science Foundation) standards.

Taste the difference yourself with PURE WATER IN EVERY DROP!

product information: