Ronaqua Sediment Water Filter Cartridge, 10x 2.5, Four-Layer Filtration, 2 Pack, 5 Microns

From the brand PURE WATER IN EVERY DROP!

Visit the Store For more info visit our store
Visit the Store For more info visit our store
Next page

Product Description Melt-blown Four Layers Filtration Polypropylene Sediment Filter (2 pack)

A Sediment Water Filter removes the physical debris and impurities from your water. The sediment filter has tiny holes through which water is able to pass, however the unwanted particles are not. As these particles come in different sizes, so do the filters. The filter sizes are measured in microns, the smaller the micron measurement, the smaller the holes in the filter, allowing to hold back the smallest of particles. Generally, for water that is more visibly polluted, containing larger particles, a sediment filter of a larger size (such as 20 or 50 microns) is recommended in the first stage of installation to prevent the clogging of the next stage(s) of filters.

This sediment filter is often the first filter installed in the Reverse Osmosis circuit and acts as a net as it catches unwanted particles, including sand, dirt, silt, rust, and other fine particles. Sediment filters are made of fine melted polypropylene, which is then blown and spun into a cylinder-like form. Polypropylene is a substance that is resistant to chemical solvents, bases, and acids. Removal of these particles allows filters, such as Carbon Block or GAC (Granular Activated Carbon) filters, to perform better and for longer periods of time.

These particles and pollutants come from water sources, old and dirty pipes, as well as contaminants that are used to treat the water. These Sediment Water Filters Intercept all Following Impurities: Rust & Corrosion, Coarse Sand, Hard Scale, Fine Sand, Particles, Sediment, and Dirt.

These universal sediment filters are 2.5 x 10-inch. Fit most standard under-sink Reverse Osmosis water filtration units or any type of water filtration units with standard 10-inch housing. These cartridges are usually used as pre-filters in Reverse Osmosis Systems, Whole House Water Systems, Under Counter-top Water Filter Systems, and Counter-top Water Filter Systems to optimize performance and life span of the carbon or GAC filters.

These cartridges have superior contaminant holding capacity and flow rate compared to similar size sediment water filter cartridges. They will reduce sediment particles as small as 5 microns without adding taste, odor, or color to your water. Such filter cartridges are ideal for all residential, rural, commercial, industrial, and municipal applications.

Specifications: Filter Type: Fine Melted Polypropylene Height: 10 IN/24.4 CM Outer Diameter: 2.5 IN/6.35 CM Inner Diameter: 1.125 IN/2.5 CM Micron Rating: 5 MICRON Flow Rate: 5 GPM Operating Temperature: 40°F (4.4°C) - 125°F (51.7°C) Operating Pressure: 20 PSI (1.4 bar) - 125 PSI (8.6 bar) Product Lifetime: Replace two or three times a year - depending on your water quality Packaging: This filter is wrapped and sealed and meets NSF (National Science Foundation) Standards and Regulations.

Taste the difference yourself! This is an industry standard 10-inch 5 Micron Sediment Filter used for effectively removing most sediments, cysts, chlorine, and fluorides. It is well-matched with models of cartridges from brands like DuPont, 3M, Aqua Pure, Hydronix, Culligan, OmniFilter, GE, Aquaboon, Manitowoc, Whirlpool, and American Plumber. Replace it two or three times a year depending on your water quality. This filter meets NSF standards and regulations.

product information: